Electromagnet Istanbul; Ø80x38 mm
Our company manufactures electromagnets in Istanbul. These P80/38 (80 mm in diameter, 38 mm in height) electromagnets are used for transportation purposes and are frequently preferred in lid, pipe and box transportation services.
Electromagnets produced by our company Istanbul Elektromagnet differ according to their usage areas. Electromagnets, which have similar properties with magnets such as magnetization and energization, are electrical products. Depending on the voltage current, the magnetization level changes. Our company makes mass production in this field in Istanbul. Thanks to the electromagnets used today, many transportation services are easily performed. These products are also preferred in production and distribution lines.
Products used with these devices have the ability to receive different commands. It is also frequently seen in sheet metal transportation processes. Our electromagnets are also widely preferred in automation projects such as grinding and cutting. Despite their small structure, their attraction force is quite high. Our electromagnets, which are waterproof, have different voltage levels. It is usually found in the range of 5V, 12V and 24V. Our products can be prepared in desired sizes and dimensions in line with the demands of our customers. It has the power to operate up to a maximum temperature of 100 degrees. Our customers can get detailed information on our website or by contacting us.
Working Principle of Electromagnets
An electromagnet is an industrial component that generates a holding force by creating a magnetic field around an iron core through the electric current passing through its coil. The table below summarizes the general principles.
Electromagnet working logic, components, duty cycle and applications
|
Topic
|
Description
|
| Basic Principle |
When a DC voltage (e.g. 12V or 24V) is applied, the current flowing through the coil creates a magnetic field around the core and attracts metal surfaces. |
| Main Components |
Coil (winding), iron core, housing, connection cables, and where needed a resin coating (heat dissipation/insulation). |
| Strength of the Magnetic Field |
Current (A), voltage (V), number of windings, core material, and the cleanliness/tolerance of the contact surface determine the holding force. |
| Duty Cycle |
50% duty: Operates for a set period and then rests (for heat management). 100% duty: Suitable for continuous operation; typically a heat-resistant/resin-coated design. |
| Polarity (Poles) |
When the current direction changes, the N–S poles reverse. This is an advantage in direction-controlled applications. |
| Behavior on Power Loss |
Standard electromagnet: Holding force is lost when power is cut. Permanent-magnet type: Holding continues when power is cut and releases when power is applied (fail-safe). |
| Heating and Cooling |
Heating occurs due to coil resistance. The correct duty cycle, adequate cooling, and a suitable mounting surface are critical for lifespan/performance. |
| Applications |
Industrial lifting/holding, automation and robotic grippers, door locks, brake/release mechanisms, CNC and assembly lines. |
| Advantages |
Controllable magnetic force, fast response, remote actuation, depending on the application either fail-safe release or fail-safe hold. |
Round Electromagnets Catalog
You can find the technical drawing and standard catalog dimensions of the product in the table below. Please contact us for custom size production.
MODEL (BYR5CK/ BUR5CK)
|
Dimensions (mm)
|
Power WATT
|
Voltage VDC
|
Duty Cycle %
|
Connection POSITION
|
Cable Gland PG7-9
|
Min. Plate Thick. (mm)
|
Pull Force (N)
|
|
ØD
|
H
|
M
|
| Ø40x30 mm |
40 |
30 |
M6 |
5.2 |
24 |
50 |
TOP/SIDE |
PG7 |
5 |
470 |
| Ø50x30 mm |
50 |
30 |
M6 |
7 |
24 |
50 |
TOP/SIDE |
PG7 |
5 |
760 |
| Ø63x35 mm |
63 |
35 |
M6 |
10 |
24 |
50 |
TOP/SIDE |
PG7 |
8 |
1000 |
| Ø80x40 mm |
80 |
40 |
M8 |
15 |
24 |
50 |
TOP/SIDE |
PG7 |
10 |
2400 |
| Ø100x45 mm |
100 |
45 |
M8 |
25 |
24 |
50 |
TOP/SIDE |
PG7 |
15 |
3400 |
| Ø150x55 mm |
150 |
55 |
M16 |
37.2 |
48 |
50 |
TOP/SIDE |
PG7 |
25 |
9300 |
| Ø180x65 mm |
180 |
60 |
M20 |
50 |
48 |
50 |
TOP/SIDE |
PG7 |
30 |
15000 |
| Ø200x60 mm |
200 |
60 |
3xM12 |
65 |
48 |
50 |
TOP/SIDE |
PG9 |
35 |
25000 |
| Ø250x80 mm |
250 |
80 |
3xM12 |
90 |
48 |
50 |
TOP/SIDE |
PG9 |
40 |
30000 |
| Ø280x110 mm |
280 |
110 |
3xM12 |
150 |
48 |
50 |
TOP/SIDE |
PG9 |
50 |
40000 |
| Ø300x130 mm |
300 |
130 |
3xM12 |
180 |
48 |
50 |
TOP/SIDE |
PG9 |
80 |
45000 |